sales@irriline.com| +1 (604) 608 - 4315

HAND ROLL

  • The Hand Roll Irrigation System is similar to the Side Roll Irrigation System, but there is no power unit. It can operate manually by a single worker with double wheel fixed in the middle of the system.

    handroll-both2

    handroll

    Hand Roll Pipe: All Pipes used are 4”x 6M extruded Aluminum Pipes.

    Sprinkler: 3/4”Full circle brass sprinklers mounted on leveler with 12M interval on the system.

    Wheels: All wheels are made with hot-deep galvanized, fixed on the system with 12M interval. Two wheels, each fixed on both end of the system for better alignment.

    Irriline Hand Roll: Wheel’s heights can be 158Cm / 193Cm

    Sprinkler & crop clearance with 158Cm Wheels

    hand-roll-158cm

    Sprinkler & crop clearance with 193Cm Wheels

    hand-roll-193cm

    hand-roll-connection
    Connection to Hydrant: Hand Roll Irrigation System connects to Hydrant by 4” x 6M Flexible hose with 10 Bar Pressure and UV resistance.

    Length of the System: Hand Roll Irrigation System is available from 72M to 192M.

    Covering Area: Irrigating area covered by a Hand Roll Irrigation System depends on length of farm, soil and climate. Refer to data in the table below:

    Hand Roll Length
    M
    Farm Dimension
    M
    Covering area Hectare Irrigating time in each position Irrigating position OR Movement per Day.
    72 81 x 400 3.30 4 to 5 Hours 3 to 4 Times
    84 93 x 400 3.80 4 to 5 Hours 3 to 4 Times
    96 107 x 400 4.30 4 to 5 Hours 3 to 4 Times
    108 119 x 400 4.80 4 to 5 Hours 3 to 4 Times
    120 131 x 400 5.30 4 to 5 Hours 3 to 4 Times
    132 143 x 400 5.80 4 to 5 Hours 3 to 4 Times
    144 155 x 400 6.30 4 to 5 Hours 3 to 4 Times
    156 167 x 400 6.70 4 to 5 Hours 3 to 4 Times
    168 179 x 400 7.20 4 to 5 Hours 3 to 4 Times
    180 191 x 400 7.70 4 to 5 Hours 3 to 4 Times
    192 199 x 400 8.00 4 to 5 Hours 3 to 4 Times
    • Hand Roll Irrigation System: It is Side Roll without power unit, with max 156M length for small farms. It is easy to move by a single person without any difficulty. Hand Roll is useful for wheat, Barely, Alfa Alfa, Potato, Sugar-beet, Soybean, Grass etc.

      Hand Roll is connected to Hydrant by 4” x 6M Flexible Hose.
      The dimension of each pipe is 4” x 6M and it has one wheel with 193Cm diameter. In this case, the distance between ground and pipe will be 93Cm and sprinkler will be 110Cm high from the earth.
      The distance between 2 Sprinklers is 12M, and the movement will be 3 turn of the wheels, which is 18M. Each sprinkler is mounted on the pipe by leveller for keeping its vertical position.

    • Sprinkler

      Each 6M Pipe has a sprinkler with Protection cap fixed with leveler to keep the position of the sprinklers vertical.
      sideroll
    • Coupler

      Made of Die Cast Aluminum with Quick Connection. Easy to assemble and take down the line.
      sideroll
    • Flexible Hose

      4” x 6M UV Treated flexible hose is connected from middle or one end of the Hand Roll (depends on the length of the Hand Roll) to supply water from Hydrant to Machine.
      sideroll
    • Stabilizer

      Strong stabilizer for windy climate and long term parking.
      sideroll
    • End Plug

      Manual Valve for Cleaning the Line.
      sideroll
    • Drain Valve

      Drain Valve is fixed on each female coupler to discharge the water automatically when the hydrant is closed.
      sideroll
  • Operations of Hand Roll

    sideroll operation

    Hand Roll is an aluminum pipe (lateral) mounted on large wheels. The Hand Roll irrigates in place (does not move while irrigating), and it is moved from position to position between irrigation runs. An air-cooled gasoline engine provides the required power to move the aluminum sprinkler line across the field. The aluminum pipe is connected to hydrants by a flexible hose. The hydrants are usually spaced every 18 meters (60′) along the supply line (mainline). The supply line may be located along one edge or in the center of the field.

    The Hand Roll is very simple to operate. When an irrigation run is finished, the operator simply turns off the mainline valve and disconnects the flexible hose. The drain valves automatically drain the pipe due to the reduced pressure. The operator then manually moves the line and rolls the pipe to the next hydrant position along the field, reconnects the flexible hose, turns on the water and starts the next irrigation run. The whole operation of repositioning takes about 20 minutes for a single person. When the Motoroll has reached the last position at the end of the field, it is driven back to the starting point for the next irrigation cycle.

    • Pipe

      A. 100 mm x 12 m x 1.8 mm (4″ x 40′ x 0.071″) extruded aluminum pipe with male and female couplers.
      B. 100 mm x 12 m x 1.8 mm (4″ x 40′ x 0.071″) extruded aluminum pipe with male and female couplers.
    • Hose Set

      A. 100 mm x 6 m (4″ x 20′) UV-treated flexible discharge hose with standard adapters.
      B. 100 mm x 100 mm (4″ x 4″) hydrant opener.
    • Couplers

      A. Quality die cast aluminum couplers, fixed with epoxy and handle band.
      B. Female couplers with outlet and flapper.
      C. Quality torque coupler clamp and gaskets.
    • Sprinklers

      A. Brass sprinklers with protection cap, 1.8 m3/hr flow rate and about 18 m radius with 4 bar operating pressure.
      B. Galvanized sprinkler levelers, risers and elbows.
    • Wheels

      Hot dip galvanized 1.47 m (58″), 1.93 m (76″), or 2.85 m (112″) diameter wheels, including 20 spokes, hubs, half rims, 10 strong 3 mm cleats.
    • End Plug

      Die cast flush plug with splash guard for cleaning debris.
    • Stabilizers

      Galvanized stabilizers for windy conditions (optional).
  • Performance of Side Roll

    Area (Ha) irrigated by a Side Roll: for different lengths, application rates, and irrigation cycles

    sideroll_performance

    1. PARTS

    2. PARTS NO.

    3. DESCRIPTION

    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    2. Sprinkler 3/4″ PC
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1

    1. 4”X12 m Alum Pipe with 2 Coupler